Solar Car Engineering Challenge Unit

Grades:
6-8
Description:

Students will build a solar car using instructions provided (Sol Run). They will take measurements of their car and then test to see how fast it can travel a 3m track. After students obtain their initial results they will research how to improve the car’s...

+
-
More Details Less Details
Learning Goal(s):
After the completion of this lesson students will be able to: • Describe how solar cars work • Accurately record and measure data • Use data to propose changes to experimental designs • Research a topic • Complete a full engineering assignment • Explain pros/cons of various prototypes • Work successfully within a group to accomplish a specific task • Brainstorm various ideas
Author:
Todd Freiboth
Estimated Activity Length:
40 min
SODIS_UV Treament

Solar and SODIS: Creating Clean Water for the World

Grades:
5-8
Description:

According to Nobel Laureate Richard Smalley, the number one and two challenges for humanity are energy and clean water. This classroom activity will introduce students to a low cost, renewable technique that connects these two issues. During the activity,...

+
-
More Details Less Details
Learning Goal(s):
Students will be introduced to the range of microbes in the environment, understand the risks of “dirty water” and be able to explain how energy from the sun can purify water through the SODIS technique.
Author:
Jamie Repasky
Estimated Activity Length:
1 hour
Solar Circuit

Using a Multimeter to Analyze a Solar Circuit: Measuring Current and Voltage—Calculating Power and Resistance

Grades:
6-12
Description:

Students will set up a simple circuit using a multimeter and a load resistor to measure the voltage and current in the circuit. Students will learn to use a multimeter, learn how to calculate power and be introduced to Ohm’s Law. This activity provides a...

Energy Content:
+
-
More Details Less Details
Learning Goal(s):
Students will understand that voltage is a measure of a difference in electric potential energy and that current is the rate at which charge flows through a circuit.Students will understand how to measure and quantify electricity. Students will become familiar with the relationships between the fundamental electrical quantities.
Author:
Emily Barrett
Estimated Activity Length:
1 hour
Solar Circuit

Circuit Analysis With Solar Energy: Measure the Power Consumed by Various Devices

Grades:
6-12
Description:

Students will set up a simple circuit using a solar module and three small loads. They will then use a multimeter to measure the voltage across each load and the current through each circuit. Students will then calculate the power consumption and...

+
-
More Details Less Details
Learning Goal(s):
Students will understand that voltage is a measure of a difference in electric potential energy and that current is the rate at which charge flows through a circuit. Students will understand how to measure and quantify electricity. Students will become familiar with the relationships between the fundamental electrical quantities.
Author:
Emily Barrett
Estimated Activity Length:
1 hour

Constructing a Solar-Powered MintyBoost USB Charger

Grades:
6-8
Description:

Students will receive a background on solar energy, solar energy applications, and electrical circuit components. Students will then apply these concepts to a Home Energy Consumption worksheet and the construction of a Solar Module MintyBoost USB Charger,...

+
-
More Details Less Details
Learning Goal(s):
Students will gain a background on solar energy and be able to apply terms such as solar modules, photovoltaics, and solar power. Students will gain a background on electrical circuit components and be able to apply terms such as capacitor, resistor, diode, alternating and direct current, amps, inductor, volts, and watts. Through the completion of the Home Energy Consumption worksheet, students will determine their family’s monthly energy consumption and calculate the monthly dollar cost for household items such as light bulbs, game consoles, and televisions. Students will demonstrate their understanding of solar energy and electrical circuits through the construction of a Solar Module MintyBoost USB Charger and a presentation of their own unique product that utilizes the solar charger.
Author:
Deb Frankel
Other Subjects Covered:
Estimated Activity Length:
10 hours
Design a 50 Year Energy Plan

50 Year Energy Plan - Unit Plan

Grades:
9-12
Description:

Throughout this creative, hands-on Unit, students are challenged to scale up every Disciplinary Core Idea and Science & Engineering Practice they’ve learned - from simple electricity generation, to building their own stereo speakers and DIY electric...

+
-
More Details Less Details
Learning Goal(s):
Explore causes and effects of climate change as related to energy production. Develop a working understanding of varying stakeholder perspectives on the causes and effects of climate change. Through hands-on exploration, build a working speaker that can connect to a cellphone. Use DIY speakers as a model to observe the process of producing electrical currents with a simple generator. Design, build and refine a wind turbine to efficiently convert mechanical energy into electrical energy. Design, build and refine a system that is the most effective at converting the sunlight into electrical energy. Students develop models to study the relationship between the Earth’s atmospheric composition and the Earth’s surface temperatures using simple diagrams. Students reflect on the impact of energy sources and power production on the environment. Students utilize their knowledge of how energy generation processes impacts the environment to inform how and why they develop a 50-year Energy Plan for their local community. 
Author:
Bradford Hill
Estimated Activity Length:
0 sec
Sphero SPRK+

Solar SPRK+ Unit Overview

Grades:
6-8
Unit:
Description:

This unit incorporates basic programming knowledge and solar energy into an engineering design challenge using Sphero SPRK+ robots. The theme for this challenge centers on the idea of Mars rovers, and the challenges faced in space exploration, specifically...

+
-
More Details Less Details
Learning Goal(s):
Students will develop tools to use in the Engineering Design Process.Students will learn drag and drop programming with Sphero Edu (formerly Lightning Lab).Students will determine how series and parallel circuits affect voltage and current.Students will understand how to use photovoltaic sources to charge a SPRK+.Students will design a chariot to carry a photovoltaic power source for a SPRK+.Students will learn to program a SPRK+ ball and chariot through a maze.
Author:
Deb Frankel
Estimated Activity Length:
10 hours
Arduino Angler Design

Illuminate Me: Merging Conductive Sewing, Technology, and Solar Power

Grades:
7-12
Description:

Light up your clothing using solar power! For this unit, students will attach thin, flexible solar modules to a bike helmet and recharge NiMH rechargeable batteries for a renewable energy battery pack. The rechargeable batteries will be used to light up...

+
-
More Details Less Details
Learning Goal(s):
1. Students will design and sew a wearable circuit using conductive thread. 2. Students will program a wearable microcontroller to light up garment with bright LEDs. 3. Students will incorporate solar power into a wearable garment project by recharging NiMH batteries for a renewable energy battery pack. 4. Students will apply knowledge of circuitry and energy transfer to maximize design.
Author:
Kristy Schneider
Estimated Activity Length:
10 hours
Solar Mini House

Mini Solar Houses Unit

Grades:
4-6
Description:

In Lesson 1, the lesson focuses on understanding how the angle and orientation affect the amount of energy that is generated through use of a solar cell. Paper azimuth finders, Keva Planks, and multimeters will be used in order for students to draw...

+
-
More Details Less Details
Learning Goal(s):
1. Students will understand how to use an Azimuth finder to determine the direction and altitude that solar modules will face. 2. Students will learn how to describe why a solar module is pitched at a particular angle. 3. Students will understand how to measure the voltage and current for an electrical energy source. 4. Students will learn how to build a circuit that will light a light bulb with a switch and without a switch. 5. Students will understand that the electricity flows through a circuit from an energy source to a load. 6. Students will understand the difference between open and closed circuits. 7. Students will understand the similarities and differences between solar cells and batteries as an energy source. 8. Students will understand how electricity flows through a circuit (from energy sources to loads) with more than one source and more than one load. 9. Students will understand how to build series and parallel circuit and the characteristics of each. 10. Students will learn to power both a light and a fan. 11. Students will learn how to find a fault in a circuit. 12. Students will understand that the electricity flows through a circuit from an energy source to a load. 13. Students will understand the difference between open and closed circuits. 14. Students will identify the causes and solutions to various complications that arise in the construction of circuits. 15. Students will use the design process to create a roof to hold an adequate number of solar modules to power an LED and a fan. 16. Students will understand how to make a geometric net (a 2D drawing that when folded creates a 3D shape) for designing a roof.
Author:
Beverly Satterwhite
Estimated Activity Length:
8 hours
UV Color Changing Beads

Hypothesizing Why Solar Beads Change Color

Grades:
3-5
Lesson Number:
1
Description:

The purpose of this activity is to introduce the idea that sunlight is energy and that this energy can be absorbed, converted into heat, or even cause a chemical reaction to occur. This lesson is also an introduction to the process of science, involving...

Energy Content:
+
-
More Details Less Details
Learning Goal(s):
Students will be introduced to the vocabulary of observation, hypothesis, and evidence. Students will use the process of science discourse where people respectfully listen and disagree with each other’s ideas.
Author:
Leah Gorman
Relevant NGSS PE:
Other Subjects Covered:
Estimated Activity Length:
30 min

Pages